The demo program is a fully functional program except that it
will only create 25 records in each of it's three data bases. If you
decide the program will be of use to you, you will need to obtain a serial
number / activation code that will remove the limit and your installed
demo program will then become a fully operational program.
Program Download Information:
For the program, you download a file named cemeterysetup.exe. It
is a little under 4 Mega-bytes and with a 50KB connection, the download will
take roughly 20-25 minutes. It will require about 6 Mega-bytes of your hard
disk to install the program.
See our installation and operation instructions.
User Manual Download Information:
You can also download a user manual that
describes the Cemetery Management Program. The file is named cemeterymanual.exe.
It is about 620 Kilo-bytes and with a 50KB connection it will take about 7 minutes
to download. After downloading, it must be unzipped which will
result in a file that can be read on your computer or printed with Adobe
Acrobat Reader.
See our user manual downloading instructions.
Click here to download
a copy of the program.
Click here to download
a
copy of the manual.
Click her to obtain a license
number which will convert the demo program
Into a fully functional version.
